Haber & Duyurular | Global Servisler | Mobil Site
« Ürün Listesine Dön


Ana özellikler girilmemiş..

Ürün Özellikleri

The RSP-H Series machines are specifically designed for compliance with the most demanding security label inspection and finishing applications. The vision system provides 100% inspection of the web and stops the machine when a fault is detected, prior to slitting or other post-inspection operations.

The faulty label is automatically placed on the inspection/splice table where the operator can perform corrective action. Once the fault is corrected, the web reverses and the corrected label passes under the vision system a 2nd time, ensuring 100% compliant product is passed to the next stages of production.

The special design and optional large diameter idlers allow the machine to finish booklet labels.

The machines can operate in two distinct levels of compliance conforming to the required level of security. These include:

Full Compliance

In Full-Compliance-Mode, a defective label must be corrected and re-inspected before the process can continue and cannot be overridden by the operator. This mode is intended for applications where 100% compliant labels must be guaranteed.

Controlled Compliance

In this mode, the operator can choose to re-inspect the corrected label with a single button push, or bypass the re-inspection system and accept a defective label after manually inspecting or correcting it. This mode is intended for premium value-add labels that require the highest quality, but leave some discretion for the operator to increase throughput.


Working widths:               340mm (13.39”), 440mm (17.32”), 540mm (21.26”), 640mm (25.20”)

Unwind diameter:           750mm (29.53”)

Rewind diameter:            Single rewind = 550mm (21.65”) (with lay-on roller 500mm) (19.69”)

Dual rewind = 420mm (16.54”) (with lay-on roller 400mm) (15.75”)

Run speed up to:              320m/min (1050 fpm) (machine speed is material and vision system dependent)


Standard Configuration includes:

Modular design

15”  touch screen panel on pivoting arm

Vision system touch screen panel

100% servo control from Bosch Rexroth

Job memory for 500 jobs

Remote diagnostics

Unwind unit

Integration platform ready to accept industry leading vision systems

Splice table/inspection plate incl. web guide before the camera system

Dynamic web buffer

Horizontal inspection area

Web guide before the slitting unit

Cartridge slitting system incl. LED light (optional special booklet slitting)

Label/length counting

Single rewind – 76mm (3”) core holder


Available options:

Hydraulic roll lifter for dia. up to 1200mm (47.24”)

Waste rewind unit at unwind and before slitting unit

Flag & splice detection

Static elimination

Inkjet integration

Shear, razor and crush knife slitting

Full automatic knife positioning system – EPOS or RotoCut

Dual rewind

Big dual rewind module (600mm) (23.62”)

Lay-on rollers

Slip differential shafts

Strobe light

Rewind shafts – 25mm – 152mm (1” – 6”)